Alarm Dispatch for Radios

Display your alarm messages on the Motorola Portable Radios. Once installed on your Alarm Server, this software plugin lets you broadcast the alarm list to your operators using their UHF/VHF Motorola portable radios.

AlarmDispatchforRadios is a software plugin commercialized by Datamatik AS to publish the business logic or process logic onto the radios carried by the operators.

To find-out more about this new product, please visit our online store, or get in contact with us using the chatbox. AlarmDispatchforRadios is OPC compliant.

IEC 60870-5-101 over Mototrbo

Unlock your digital radio infrastructure to transport your telemetry data. Once the 'DataBox' is connected on the DB-9 rear panel of your DM4400e radio, the Process & Control data is transported over the VHF/UHF link. The serial data IEC 60870-5-101 protocol is transported over a DMR (Mototrbo) radio link which enables a seemless scada integration into your power grid.

The data throughput using a IEC101-Mototrbo radio link is roughly x10 times lower than using a serial cable connection. These perfomances will surely vary depending on the quality of the radio link but are perfectly suited for Power Grid Monitoring operations.

Hydro-power monitoring - DMR link

The following set-up unlocks your digital radio network to transfer metering data via VHF/UHF at no additional infrastructure cost.

A Mototrbo data channel is a low speed data pipe with an efficient over air data transfer rate of 1200 bps. It is suitable for transmission of simple telemetry reporting such as (level-meter values, GPS location coordinates or alarms & messages). The datathroughput of a Mototrbo radio channel will vary based on the channel configuration, eg simplex, data revert, or trunking. The data messages are 322 bytes including a 16-byte mototrbo header. A message takes approximately 2.14 seconds to transmit. For this very reason, Mototrbo telemetry applications use a 3-second updating cycle.